The desire for comfort is one of the main reasons we have an HVAC system at home. With the uncomfortable temperatures and uncertainty of the weather outside, we would want to stay in the comfort of our home and turn on the heating or cooling system to deal with it. Unfortunately, the usage of an HVAC system heavily depends on a working thermostat in your units. The thermostat tells the HVAC system the desired temperature you would want for the room. Thus, your HVAC system needs your thermostat’s input to work properly. A replacement of a defective thermostat is as important as a repair of an HVAC system. There are several reasons to consider when your thermostat requires a replacement. Regardless, you can seek the assistance of our technicians at HVAC Alliance Expert to help deal with the thermostat installation for your household.
An analog thermostat requires you to turn a dial to adjust to the desired temperature. However, you may have lesser control over your HVAC system because an analog thermostat is usually inaccurate. A non-programmable thermostat may also be grounds for a good upgrade. There are few choices for changing your desired temperature if your thermostat is not programmable with pre-set temperatures. Though these two thermostats are still in good condition, upgrading to a digital thermostat is the best solution to save you from a high electricity bill in the long run.
Suppose you already have a digital thermostat at home but are still experiencing unusually high energy bills. In that case, you may need to consider replacing it with a new one because your thermostat may give you faulty temperature readings. If your thermostat is also older than ten years, you may also consider purchasing a new thermostat since it’s over its life expectancy.
Sometimes, you cannot find the thermostat issue by looking at your thermostat type. Instead, you may find the problem if your HVAC system is not working properly. You may notice that your HVAC system is consistently turning on and off. Or the appliance is short-cycling, where the HVAC system turns off even if the temperature is not to the thermostat reading. If not a damaged component inside your HVAC system, it is most likely caused by a defective thermostat that needs replacement.
Your thermostat ensures you are comfortable with your household temperature and provides cost-efficient usage for your HVAC system at home. In conclusion, we know how a singular HVAC system can raise your household energy bills; thus, we need a working thermostat to automatically switch off the system when the room is at a comfortable temperature. Ensure that your comfort needs are met without risking a high electricity bill by replacing or upgrading your current thermostat at home. It is best to resolve the thermostat problem quickly to avoid rendering your entire HVAC system inefficient. Upgrading your thermostat device is also a good way to ensure that your HVAC system meets your current heating or cooling needs.
How Do Thermostat Impact HVAC Performance?
Your home heating and air conditioning unit relies heavily on the thermostat to figure out when to start. If there are problems with your thermostat, you may get abnormal temperatures inside your household. If the thermostat problems are not quickly resolved, you may risk health issues for the house’s residents. Especially nowadays, with very unpredictable weather, you would want the right temperature inside your home to ensure everyone is comfortable. You can ensure a working HVAC system by availing of the thermostat installation by your local technician at HVAC Alliance Expert.
Without a working thermostat, you may encounter problems with your HVAC system. The thermostat is responsible for instructing the HVAC system so the appliance knows what temperature to target for the room. To figure out how the thermostat impacts your HVAC system’s performance, we have given scenarios for a problematic thermostat at home:
- HVAC System is Short Cycling – When your thermostat is not correctly working, your HVAC system won’t be able to complete a full cooling or heating cycle to maintain the desired temperature set by the thermostat. Consistent short cycles add to your electricity bills and may risk the wear and tear on your HVAC system. If unresolved for a long time, your HVAC system may be noisy because a defective component is inside the appliance. Recalibrating the thermostat is a good way to stop the short cycling of your appliance.
Temperatures Don’t Match – When the temperature displayed on the thermostat does not match the temperature in the room, you may risk higher electricity bills because your HVAC system is constantly running. It is best to figure out why the temperature sensor portion of your thermostat has become faulty to quickly determine how much longer your HVAC system needs to run to achieve the desired room temperature. Unmatching temperatures may also be an issue with non-digital thermostats because they can give an inaccurate reading compared to the accuracy of a digital thermostat. Save yourself some money and consider upgrading to a new thermostat if this is the case for you.- Thermostat Won’t Turn On – Your HVAC system won’t be able to run if your thermostat won’t turn on because the system relies on the temperature set on the thermostat. Your thermostat may likely have run out of battery charge. However, to avoid this problem in the future, always check the battery percentage of your thermostat while your HVAC system is not in use. In general, it is also best to simply conduct regular check-ups and maintenance for your thermostat at home.
Temperatures Don’t MatchIf you want to ensure that your thermostat is working properly with your HVAC system, consider seeking the aid of our licensed repair technicians at HVAC Alliance Expert instead. We do thorough check-ups and thermostat replacements and upgrades for your home!
